Nady Systems U-1000 User Manual

UU--11000000 SSeerriieess1000 Channel PLL Frequency Synthesized UHFWireless Microphone and Instrument SystemOwners Manualnady.com

15SYSTEM OPERATIONFrequency SelectionThe transmitter and receiver must be on the same frequency to operatecorrectly. Use the Channel frequency, or Gro

14OPERATING INSTRUCTIONSUB-1000 Bodypack Transmitter6. Sensitivity Set Level (Input level sensitivity)In input level sensitivity has four choices. “1”

13OPERATING INSTRUCTIONSUB-1000 Bodypack Transmitter2. “NADY UB-100” (can not be edited)3. User NameThe User Name field has 8 character spaces. Choose

TABLE OF CONTENTSINTRODUCTION ...2SYSTEM FEATURES...

SYSTEM FEATURESU-1000 RECEIVER (Single Channel) and U-2000 RECEIVER (Dual Channel)• Unsurpassed UHF performance with 120 dB dynamic range and operatio

SPECIFICATIONS21Input Impedance ...UH-1000: 10 K Ohms UB-1000: 500 K Ohm (Instr.), 10 K Ohms (Lav), 20 K Ohms (HM

20SPECIFICATIONSSYSTEM SPECIFICATIONSOperating Frequency Range ...1000 channels switchable Freq. Synthesized...

19TIPS• For operation with external antenna, low loss RF shielded cable should beused and the length of the cable should not exceed 3m.• Do not place

18SYSTEM OPERATION(Note: The UH transmitter CAP (7) must be removed before installing the USBcable.) (Note: Only one transmitter can be used with one

Connecting Audio OutputThere are two audio outputs on the back of the receiver. Mic-level balanced andLine-level unbalanced. Use shielded audio cable

16SYSTEM OPERATIONLevel adjustmentUB-1000 TransmitterThe input level has four choices. “1” is the lowest gain, and “4” is the highest.For instrument,